Corichem products range

Published: 18 April, 2006

Coripur AG20 is a polyurethane dispersion which provides a film with high softness, tenacity and good stickiness. Thanks to its features, Coripur AG20 is a very good adhesion promoter and a polishable binder in base coats and sealing coats for upholstery and shoe upper. It is non-ionic, so can be used both in anionic and cationic systems.

Coripur 146 creates a brilliant, high-tenacity film which is elastic and lightfast. It is used to finish splits and buffed leather because it increases the general finishing fastness. Coripur 146 has very good print retention. It can be milled. Furthermore, Coripur 146 has excellent cold resistance and light fastness.

Coripur S AG8 is a synthetic resin in solvent. It is used as adhesion promoter to re-finish old finished leathers. Coripur S AG8 can also be used as a fixing agent and it has very good light fastness. Coripur S AG8 is suitable for pastel shades, providing excellent physical-mechanical resistances. The product is used sprayed alone or after dilution with a thinner in a 1:1 ratio.

Corimul F51 is a blend of oils and surfactants that it is used mainly to obtain pull-up effects having natural aspect on full grain or corrected grain leathers. This can be sprayed on or applied with a roller coater machine. It can be diluted both in water and in organic solvents.

Corimul IC is used on full grain leather, nubuck and suede splits. It gives a particularly round handle. On full grain and nubuck leather a light pull-up effect is obtained. Application can be carried out via spraying or roller-coating. Corimul IC can be emulsified in water, so the cleaning operations of the machine are much easier.

Printer friendly version

Email this article to a friend